Operating Instructions
COOKER
GB
Contents
GB
Installation, 2-6
Positioning and levelling
English, 1
Electrical connections
Gas connection
Adapting to different types of gas
Technical data
Table of burner and nozzle specifications
Description of the appliance, 7
Overall view
Control panel
Start-up and use, 8-10
Using the hob
Using the oven
Analogue timer
Oven cooking advice table
IS50G
IS50G1
Precautions and tips, 11
General safety
Disposal
Respecting and conserving the environment
Maintenance and care, 12
Switching the appliance off
Cleaning the appliance
Gas tap maintenance
Replacing the oven light bulb
Assistance
You must read these instructions prior to using
your appliance and retain them for future use.
• the hose must always be in good condition, never
attempt to repair.
GB
Gas connection
! The installation must comply with gas safety
(installation and use) regulations 1984. In all cases
for the above, by low, a qualified, Gas Safe approved
engineer must be called for installation.
T he cooker should be connected to the gas-supply
by a Gas Safe registered installer. During installation of
this product it is essential to fit an approved gas tap
to isolate the supply from the appliance for the
convenience of any subsequent removal or
servicing. Connection of the appliance to the gas
mains or liquid gas must be carried out according to
the prescribed regulation in force, and only after it is
ascertained that it is adaptable to the type of gas to
be used. If not, follow the instructions indicated in
the paragraph headed “Adaptation to different gas
types”. On some models the gas supply can be
connected on the left or on the right, as necessary;
to change the
Electrial connection
Power supply voltage and frequency: 230-240V a.c.
|