K00347 ICE DEFLECTOR KIT
Installation Instructions
The K00347, ice deflector kit, must be used with the S-0300, S-0450, S-0500, S-0600, S-0850, and S-1000 ice machines,
when the ice machine is used on a non-Manitowoc ice storage bin.
1. Remove both front panels.
2. Examine the ice machine to see if the machine has four screws on the lower front plastic panels (see drawing).
3. If there are screws, remove them from the countersunk holes on the front surface of the machine. Save the screws.
4. Install the deflector, using the four screws that were removed in step 3.
5. Four screws and two backing plates are in the kit.
6. If there are no screws on the ice machine (step 2), pierce the thin plastic countersunk holes, install the backing
plates, and install the deflector, using the screws from the kit.
7. Replace the front panels.
Backing Plate
to be Inserted
into Side Pocket
of Bulkhead
Backing Plate to be
Screws
Inserted into Side
Pocket of Bulkhead
New Ice
Deflector
Screws
|
Kyocera Scanner KM 3650w User Manual
La Crosse Technology Clock 616 146v2 User Manual
Land Pride Lawn Mower ZSR54 ZSR60 User Manual
Lathem GPS Receiver ATX GPS User Manual
LG Electronics Refrigerator LPXS30866D User Manual
Maytag Refrigerator W10289680A User Manual
Me Inc Network Card NumaLink 30 User Manual
Metabo Planer Routers and Planers User Manual
MGE UPS Systems Power Supply Nova 1100 AVR User Manual
Midland Radio Radio LXT340 Series User Manual